Dodge Durango Wheel Torque Specs

If you're considering upgrading the aesthetics of your Dodge Durango by adding aftermarket wheels, it's important to pay attention to the proper torque specification for the lug nuts. Whether you're replacing your existing wheels or installing new ones, ensuring the lug nuts are torqued correctly is essential. In this article, we will dive into the specific wheel torque specifications for the Dodge Durango, providing you with the necessary information to ensure a secure and safe wheel installation.

What Are Wheel Torque Specs?

Wheel torque specs refer to the specific amount of force or torque that should be applied to the lug nuts or bolts when installing or tightening wheels onto a vehicle. These specifications are determined by the vehicle manufacturer and are intended to ensure proper and secure attachment of the wheels. Wheel torque specs are typically expressed in foot-pounds (lb-ft) or Newton-meters (Nm) and vary depending on factors such as the vehicle make, model, and wheel size. It is crucial to follow the recommended torque specs provided by the manufacturer to prevent under or over-tightening, which can lead to wheel damage or safety hazards.

Dodge Durango Wheel Torque Specs

Please note that the torque specifications provided below serve as a general guide. It is essential to consult your vehicle's user manual for the manufacturer's specific and recommended torque specifications. Different models and trim levels may have varying torque requirements. Always refer to the vehicle’s manual for the accurate and appropriate torque specifications for your particular vehicle.

How To Torque Dodge Durango Lug Nuts 

Properly torquing wheel lug nuts is essential for the safe installation of wheels. Follow these step-by-step instructions to ensure a secure fit:

Step 1: Gather the necessary tools

Collect a torque wrench, a socket that fits your lug nuts, and a breaker bar or wrench for initial loosening.

Step 2: Loosen the lug nuts

Before lifting the vehicle, use the breaker bar or wrench to loosen the lug nuts in a counterclockwise direction. Avoid removing them entirely at this stage.

Step 3: Lift the vehicle

Utilize a jack to raise the vehicle, ensuring it is supported by jack stands placed on designated lifting points specified in the manual.

Step 4: Remove the lug nuts

Completely remove the previously loosened lug nuts from each wheel and set them aside safely.

Step 5: Clean the wheel studs and lug nut seats

Thoroughly clean the wheel studs and lug nut seats using a wire brush or a clean rag to eliminate any dirt, debris, or rust.

Step 6: Install the wheel

Position the wheel onto the wheel studs carefully, ensuring it is flush against the hub.

Step 7: Hand-tighten the lug nuts

Begin hand-threading the lug nuts onto the wheel studs in a star or crisscross pattern to ensure even tightening and prevent wheel warping.

Step 8: Use the torque wrench

Consult your vehicle manual or a sticker located in the door jamb or glove compartment to determine the recommended torque value. Set the torque wrench accordingly.

Step 9: Tighten the lug nuts in a star pattern

Starting from one lug nut, use the torque wrench in a star or crisscross pattern, moving diagonally to the opposite nut. Repeat until all lug nuts are properly torqued.

Step 10: Double-check the torque

Repeat the torqueing process one more time to confirm that all lug nuts are tightened to the specified torque.

Step 11: Lower the vehicle

Lower the vehicle cautiously using the jack, ensuring all wheels are securely on the ground before removing the jack stands.

Step 12: Final check

Perform a final check of each lug nut using the torque wrench to verify that they remain adequately torqued. This step ensures the lug nuts have not loosened during the lowering process.

Dodge Durango Wheels At KOW Performance

Whether adding new wheels to your Durango or putting your factory wheels back on after a repair, knowing the proper torque specs for your lug nuts is crucial. We hope that the above guide helps you better understand the required torque specs for your Dodge Durango. If you are in the market for new wheels for your vehicle, check out our full selection of Dodge Durango wheels.